Gravity feed question
FTE Chapter Leader
Joined: Sep 2011
Posts: 63,232
Likes: 6,665
From: Great Falls, Montana
Been a while.. just a note to advise others..
I used one of the electric valves to control flow out of my RDS tank.
Last fall the darned valve stopped working.. the coil fried.. had to order another whole valve to get a replacement coil..
during this process I was looking at the duty cycle of the value..
100% duty cycle, but not continuous... what the heck is that? I thought 100 was 100?
anyhow, replaced coil and its working fine.. so, for those that have done the same, check the coil... I started blowing fuses.. every day
I used one of the electric valves to control flow out of my RDS tank.
Last fall the darned valve stopped working.. the coil fried.. had to order another whole valve to get a replacement coil..
during this process I was looking at the duty cycle of the value..
100% duty cycle, but not continuous... what the heck is that? I thought 100 was 100?
anyhow, replaced coil and its working fine.. so, for those that have done the same, check the coil... I started blowing fuses.. every day
Thanks Sam.......
I purchased one awhile ago. Have not gotten to that item yet. I have just a manual valve right now. I will look closely at the specs on my valve......
How's Life Sam.......??
Logistics Pro
Joined: Mar 2005
Posts: 3,550
Likes: 2,510
From: West Michigan
Been a while.. just a note to advise others..
I used one of the electric valves to control flow out of my RDS tank.
Last fall the darned valve stopped working.. the coil fried.. had to order another whole valve to get a replacement coil..
during this process I was looking at the duty cycle of the value..
100% duty cycle, but not continuous... what the heck is that? I thought 100 was 100?
anyhow, replaced coil and its working fine.. so, for those that have done the same, check the coil... I started blowing fuses.. every day
I used one of the electric valves to control flow out of my RDS tank.
Last fall the darned valve stopped working.. the coil fried.. had to order another whole valve to get a replacement coil..
during this process I was looking at the duty cycle of the value..
100% duty cycle, but not continuous... what the heck is that? I thought 100 was 100?
anyhow, replaced coil and its working fine.. so, for those that have done the same, check the coil... I started blowing fuses.. every day
Thread
Thread Starter
Forum
Replies
Last Post
gtinswva
1987 - 1996 F150 & Larger F-Series Trucks
12
Mar 15, 2013 03:26 PM
Hunt4Fun
1987 - 1996 F150 & Larger F-Series Trucks
5
Nov 30, 2007 07:44 PM
