Transmission/tcase advice
Thread Starter
|
New User
Joined: Dec 2013
Posts: 24
Likes: 0
From: Shelby, NC
Transmission/tcase advice
I have a good cab from a 1964 f100 and a flareside bed from a 1961 f100. I am planning to mount them on the frame from a 1997 AWD 5.0 Mercury Mountaineer.
The plan was to use no computer controlled components on this truck. I have a carb'd 302 I have built.
Now I am trying to figure out what would be a good trans/transfer case option with no electronics. The motor should make just under 400 crank hp.
I have considered using the trans thats in the mountaineer now and swap to a BW4406 tcase because I can use driveshafts from an f150 and expedition to avoid making custom shafts.
I am open to a manual or automatic.
Anyone have any suggestions for me?
The plan was to use no computer controlled components on this truck. I have a carb'd 302 I have built.
Now I am trying to figure out what would be a good trans/transfer case option with no electronics. The motor should make just under 400 crank hp.
I have considered using the trans thats in the mountaineer now and swap to a BW4406 tcase because I can use driveshafts from an f150 and expedition to avoid making custom shafts.
I am open to a manual or automatic.
Anyone have any suggestions for me?
Thread
Thread Starter
Forum
Replies
Last Post
KRAZY KRAMER
1987 - 1996 F150 & Larger F-Series Trucks
4
Mar 30, 2009 10:10 PM
