What size socket for Center Bearing replacement?
#1
#3
Mine was 16MM, to remove the two bolts.
I saw a You Tube video that provided the socket sizes, they were all wrong for mine.
Mine were 8MM for the u-joints, 16MM for the center bearing.
I read that the yoke is 33MM, can't verify that, as I had a shop do it for me.
The shop charged me $40 labor to install all u-joints and the center bearing,
That was better having my friend beat the crap out of them with a hammer and vise.
I saw a You Tube video that provided the socket sizes, they were all wrong for mine.
Mine were 8MM for the u-joints, 16MM for the center bearing.
I read that the yoke is 33MM, can't verify that, as I had a shop do it for me.
The shop charged me $40 labor to install all u-joints and the center bearing,
That was better having my friend beat the crap out of them with a hammer and vise.
Thread
Thread Starter
Forum
Replies
Last Post
leavingonajetplane
Escape & Escape Hybrid
9
12-22-2017 01:00 PM
68horses
1967 - 1972 F-100 & Larger F-Series Trucks
3
10-26-2010 10:29 PM