I have a set of 2in lowering shackles that I think will clear the bed of my 64 Flareside if I lift the bed 1/4 or 3/8 in.


That small a lift will not be noticeable on the bodylines, especially with a flareside.


I need (6) 1/4 blocks that are about 2x2 in in size.


Any idea where I can find something like that local?

 

Big box stores carry some flat steel about 2" wide that can be cut to size, and drilled. Have a couple of different thicknesses.

 

I went to Home Depot and found bearing plates. They will work nicely.