When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
OK guys Ive been playing with tourqe a little bit. Got a few pids up and took it for a drive trying to make a data log. I guess I dont have the logs set up right cause the data I emailed was not what I wanted. Anyway, I took this sceenshot from my short drive. I put it to the floor and jumped up to 70mph before I had to back off. The red marks on the dials are the max for the log I assume.
Now, How does it look? I am new to this and dont know what to do with the data.
I`m really curious about the ebp. Thats the only thing I have not checked since I`ve owned the truck. Is that a normal reading for flooring it? I want to clean it just have not got around to it. I`m open to advice tugley.
EBP sometimes looks dramatically higher when you just look at the maxes only. I can get 29 PSI EBP with zero boost in my driveway at an idle with a cold truck (with everything working and reading 100% correct). A tuned truck can have a dramatic high max ICP, but the WOT performance is much lower than max.
