Large Truck My truck is bigger than yours. The forum for 2+ ton trucks (all years), COE's, Louisville's, Big-Job's etc.

1964 Ford F600 292 exhaust manifold replacement

Thread Tools
 
Search this Thread
 
  #1  
Old 04-09-2015, 03:00 PM
arvet19's Avatar
arvet19
arvet19 is offline
New User
Thread Starter
Join Date: Jan 2015
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
1964 Ford F600 292 exhaust manifold replacement

I have a 1964 Ford F600 bob truck with hydraulic dump bed. Been on our farm since 68. Original 292 has a cracked driverside manifold and a rotten crossover pipe. Runs great just really loud. Will any 57-64 292 manifold bolt up or are the truck ones different. Any suggestions on finding a manifold is appreciated. Thanks
 
  #2  
Old 04-09-2015, 07:12 PM
finn's Avatar
finn
finn is offline
More Turbo
Join Date: Dec 2003
Location: Upper penninsula
Posts: 583
Received 6 Likes on 4 Posts
Back in the day when our family car, a Y-block powered '57 Ford DelRio station wagon cracked an exhaust manifold, my dad had the local service station (remember them?) weld it up. It was still holding when he traded it for a new Y-block powered '61 Ford.

I was 7 or 8 years old at the time, but somehow I remember this "important" event.
 
  #3  
Old 04-09-2015, 07:45 PM
85e150's Avatar
85e150
85e150 is offline
Super Moderator
Join Date: Apr 2004
Posts: 31,876
Received 1,596 Likes on 1,301 Posts
Welding cast can be done, but it is an art.

Looks like you can find the manifold on all kinds of vehicles:

Y-Block.Info Exhaust Manifold Casting Numbers

Will the rams horn type manifolds fit?
 
  #4  
Old 04-09-2015, 08:40 PM
Tedster9's Avatar
Tedster9
Tedster9 is offline
Post Fiend
Join Date: Apr 2002
Location: Waterloo, Iowa
Posts: 19,311
Likes: 0
Received 66 Likes on 65 Posts
Welcome to FTE, btw

The two barrel intakes are common and cheap compared to the four barrel versions.
 
  #5  
Old 04-09-2015, 09:20 PM
arvet19's Avatar
arvet19
arvet19 is offline
New User
Thread Starter
Join Date: Jan 2015
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the help. The next task is getting the old manifold off to repair or replace. I have a 66 F600 parts truck with a good 330 V8 but would like to stay original if possible. Will try to post pictures.
 
  #6  
Old 04-09-2015, 09:53 PM
Tedster9's Avatar
Tedster9
Tedster9 is offline
Post Fiend
Join Date: Apr 2002
Location: Waterloo, Iowa
Posts: 19,311
Likes: 0
Received 66 Likes on 65 Posts
Sounds good. While replacing manifold, might want to adjust valve lash on the solid lifters. Here's a good method for the Y block:

http://www.potomacbird.com/pctc/Publ...-valvelash.pdf
 
  #7  
Old 04-10-2015, 02:55 PM
NumberDummy's Avatar
NumberDummy
NumberDummy is offline
Ford Parts Specialist

Join Date: Nov 2006
Location: Simi Valley, CA
Posts: 88,826
Received 648 Likes on 543 Posts
B5A-9431-B .. Left Exhaust Manifold-Use with 2V Carburetor & Single Exhaust / Obsolete

1955/56 272 Ford Passenger Cars except Station Wagon & Fairlane / 1955 F100/600 239 / 1956/59 F100/600 272 / 1957/64 F100/600 292.

FRIESEN FORD in Aurora NE has 1 = 402-694-3111.

NOS PARTS LTD in Waxahachie TX has 1 = 972-937-2201.

HIGH BUCK! BOB ALLEN FORD in Overland Park KS has 3 = 800-676-0675.
------------------------------------------------------------------------------------
B5A-5267-B .. Crossover Pipe-Use with Single Exhaust / Obsolete

1955/56 Ford Passenger Cars 272/292/312 / 1955/64 F100/600 239/272/292

NOS PARTS SOURCE in Olathe KS has 1 = 913-220-5746.

MCDONALD OBSOLETE PARTS CO. in Rockport IN has 1 = 812-359-4965.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1950fordf3delivery
1948 - 1956 F1, F100 & Larger F-Series Trucks
8
01-11-2016 10:55 AM
axehandle
1948 - 1956 F1, F100 & Larger F-Series Trucks
4
08-26-2013 10:33 AM
dillon
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
09-25-2000 02:02 AM



Quick Reply: 1964 Ford F600 292 exhaust manifold replacement



All times are GMT -5. The time now is 08:25 AM.