what power do I have
Thread Starter
|
Senior User
Joined: Mar 2003
Posts: 174
Likes: 0
From: Vermont
what power do I have
I have a 360 punched 30 over with a edlebrock proformer 390 intake a edlebrock cam not sure of the specs. a 600cfm proformer carb. stock pistons rods and crank I am wondering what kind of horsepower and torque this combo should create for me I will also be putting in a b+m stage 2 street/strip shift kit for the c-6 and am looking for a possi rearend (this is my daily driver)
Lead Driver
Joined: Apr 2001
Posts: 6,175
Likes: 21
From: Texas
what power do I have
I tried to run it with the Performer cam specs:
222 HP at 4000 rpm
334 lb-ft torque at 3000 rpm
That's what I get with stock heads and exhaust.
HP steps up to 257 and torque to 367 with Headers.
It seeems a little low, but the performer is a pretty mild cam.
222 HP at 4000 rpm
334 lb-ft torque at 3000 rpm
That's what I get with stock heads and exhaust.
HP steps up to 257 and torque to 367 with Headers.
It seeems a little low, but the performer is a pretty mild cam.
Thread
Thread Starter
Forum
Replies
Last Post
Pipelinewelder20
1973 - 1979 F-100 & Larger F-Series Trucks
2
Jun 29, 2014 03:10 PM
billy-buck
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
16
May 5, 2014 02:15 PM
fromm
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
11
May 6, 2010 01:31 PM
deshet1980
Excursion - King of SUVs
5
Nov 26, 2007 09:15 PM
