Pulled push rod
Thread Starter
|
Mountain Pass
Joined: Feb 2013
Posts: 244
Likes: 0
From: Cadillac, Michigan
Pulled push rod
Hey there, got a question about a rocker arm stud on a 300-6cyl. I replaced the rocker arm thinking it was bad, only to find out my rocker arm stud has pulled out about 3/8 of a inch! What are the chances of the stud pulling completely out? I don't have the resources to pull the head and have it professionally fixed. Is there a way for me to fix it myself? I've worked on autos for years but don't know if I am able to fix this problem. Any advice will be greatly appreciated. Thanks all.
Posting Guru
Joined: Apr 2011
Posts: 1,636
Likes: 5
From: Orlando area
You can get oversize (like .003) press in studs.
Here's an example (although not for your application/Ford) http://www.summitracing.com/parts/slp-mr-1752/overview/
Here's an example (although not for your application/Ford) http://www.summitracing.com/parts/slp-mr-1752/overview/
Thread
Thread Starter
Forum
Replies
Last Post
Thinlizzy13
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
6
Oct 11, 2015 03:47 PM
