Holley 4180c - HELP

Reply Subscribe

Thread Tools

Search this Thread

Mar 12, 2015 | 12:51 AM

Tkc432

Thread Starter

Freshman User

Joined: Mar 2015

Posts: 48

Likes: 0

From: Windsor, California

Holley 4180c - HELP

I have a 1983 Ford F250 ...... and I am in California so it has all the emissions crap on it

.... The stock Holley 4180c took a crap

.... beyond rebuild .... there is a crack in the rear meetering block so fuel leaks out and the fuel rail is dented as well. Doubt a typical rebuild could fix this problem.

Any ideas on what I can do to get er running again without spraying fuel everywhere? A rebuilt carb of this type is super expensive ..... Can't find a used one at my local pic n pull either. I would like to pickup a used one somewhere that is in ok running condition .... I can do a standard rebuild to it myself,

So any help would be greatly appreciated,

Thanks

Mar 12, 2015 | 10:23 AM

ctubutis

Moderator

Joined: Nov 2007

Posts: 22,415

Likes: 92

From: Denver Metro Area, CO

You might have better luck asking in these two places:

California, Northern Chapter

California, Southern Chapter

Mar 12, 2015 | 02:09 PM

Tkc432

Thread Starter

Freshman User

Joined: Mar 2015

Posts: 48

Likes: 0

From: Windsor, California

Thanks.
Just reposted in the Northern California chapter section.

Mar 12, 2015 | 07:22 PM

Franklin2

Moderator

Joined: Jan 2001

Posts: 56,966

Likes: 2,728

From: Virginia

Here's a couple of places in Ca that say they have one. I plugged in Ca emissions and a automatic tranny.

1983
Carburetor
Ford Truck F250 not Super Duty E3TE-SB HOLLEY FACTORY CARB WITH FUEL BOWL VENTS ON PRIMARIES AND SECONDARIES OFF GOOD RUNNING ENGINE F10226 $189 Viking Truck and Auto USA-CA(Redding) Request_Quote 1-800-338-7474 Request_Insurance_Quote
1983
Carburetor
Ford Truck F350 4BBL HOLLEY 460 65278 $Call Oakdale Auto Recyclers, Inc. USA-CA(Oakdale) Request_Quote 800-481-9961/209-847-2224 Request_Insurance_Quote