Need help
Thread Starter
|
Senior User
Joined: Aug 2014
Posts: 389
Likes: 0
My truck had a loud grinding noise that I found out was the front right inner wheel bearing. I got new bearings/seals and hub/rotor assemblies. Went to install them today and when I pulled the hub/rotor off I realized the spindle was ruined. So I have a few questions. Where can I get a new spindle? Is it a salvage yard only part? How do you remove the spindle from the steering knuckle, or is it one piece? Thanks guys
Edit: forgot to mention the truck is a 1990 f150 2 wheel drive.
Edit: forgot to mention the truck is a 1990 f150 2 wheel drive.
Logistics Pro
Joined: Mar 2005
Posts: 4,698
Likes: 47
From: Mexico, Missouri
I believe that you can order a new spindle. I have checked the parts stores in the past for this.
You need a spindle puller. I bought one years ago and it amazed me how easy it made the job. If I had more time, I'd post a pic.
Maybe someone else can post one. You can get one on eBay also.
You need a spindle puller. I bought one years ago and it amazed me how easy it made the job. If I had more time, I'd post a pic.
Maybe someone else can post one. You can get one on eBay also.
Senior User
Joined: Jan 2003
Posts: 286
Likes: 0
From: Sumter SC
cheapest would be yard, use two hammers to knock ball joints and tie rods loose after you remove nuts on them. Gotta really whack them but doesn't take long. Thats for knuckle haven't replaced spindle only
Last edited by wag53; Feb 28, 2015 at 05:03 PM. Reason: slow to reply, missed other comments
Thread Starter
|
Senior User
Joined: Aug 2014
Posts: 389
Likes: 0
So I thought the spindle and steering knuckle were separate parts on a 2wd but I found out they are the same part. Also my Chilton's book calls the whole thing a spindle. So to replace this I have to remove the ball joints. Any tips on this? I have never replaced ball joints before or removed a spindle but I am mechanically inclined
New User
Joined: Feb 2015
Posts: 7
Likes: 0
From: Portland, OR
You can get one from a salvage yard or an axle so can probably get you one or know where to obtain one.
Trending Topics
Thread Starter
|
Senior User
Joined: Aug 2014
Posts: 389
Likes: 0
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Fleet Owner
Joined: Oct 2005
Posts: 20,786
Likes: 1,751
From: Kentucky
Car-Part.com--Used Auto Parts Market is your friend.
FWIW...I think the spindle/knuckle part number is E7TZ-3105-A
FWIW...I think the spindle/knuckle part number is E7TZ-3105-A
Thread Starter
|
Senior User
Joined: Aug 2014
Posts: 389
Likes: 0
Ok guys good news got my truck back on the road. I found a good steering knuckle/spindle got it for $40. Cleaned it up and pressed in some new Moog ball joints. Got it all back together tonight and it drives great, no more noises. Thanks to all who helped
Thread
Thread Starter
Forum
Replies
Last Post
granny_rocket
1994.5 - 1997 7.3L Power Stroke Diesel
1
Jan 26, 2013 09:44 AM
ErrorS
1978 - 1996 Big Bronco
9
Sep 28, 2010 06:39 PM
