side factory tool box.
bottom trim
Thread Starter
|
New User
Joined: Feb 2015
Posts: 21
Likes: 0
bottom trim
Hey guys I was wondering if any one could help me out. I am trying to find the lower trim molding for the left side factory tool box. I've look at LMC, MAC and Dennis Carpenter and they only have molding for beds with out the Toolbox's. Anybody know of any where that would have that? Or anybody that has the 3 prices of trim I need that they would be interested in selling? Thanks
Fleet Mechanic
Joined: Sep 2009
Posts: 1,404
Likes: 14
From: Bloomington, IN
I don't think everyone sells them in the aftermarket world. Your best bet might be to check with the guys on here (classifieds threads) and see if any of those guys have any. Lots of guys parting out trucks, just not sure if any will have those, they are pretty hard to find with the factory tool box. Good luck!!
Hey guys I was wondering if any one could help me out. I am trying to find the lower trim molding for the left side factory tool box. I've look at LMC, MAC and Dennis Carpenter and they only have molding for beds with out the Toolbox's. Anybody know of any where that would have that? Or anybody that has the 3 prices of trim I need that they would be interested in selling? Thanks
Moderator & parts slinger
Joined: Feb 2007
Posts: 50,247
Likes: 5,815
From: S/W Missouri, Polk county
What LEFT side tool box? You mean you need the very bottom 4" wide stuff for the RIGHT bed side tool box?
X2 on a WTB add in the wanted to buy section.
Worse case buy the one piece and time to break open the tool box.
X2 on a WTB add in the wanted to buy section.
Worse case buy the one piece and time to break open the tool box.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
Tool storage compartment located on the right (passenger) side. None of these 3 mouldings are reproduced.
1973/79 F100/350 8' Styleside pickups with tool storage compartment except F350's on the 140" wheelbase; except 1977/79 F100/350's with Race Track mouldings.
D3TZ-9929076-E .. Moulding in front of tool storage compartment door / Obsolete
NOS PARTS LTD in Waxahachie TX has 1 = 972-937-2201.
WESLEY OBSOLETE PARTS in Liberty KY has 1 = 606-787-5293.
MCDONALD OBSOLETE PARTS CO. in Rockport IN has 1 = 812-359-4965.
MUSTANG SERVICE CENTER in North Hollywood CA has 1 = 818-765-9266.
-------------------------------------------------------------------------------------
D3TZ-9929076-B .. Moulding on tool storage compartment door / Obsolete
No Ford dealer or obsolete parts vendor has any.
-------------------------------------------------------
D3TZ-9929076-D .. Moulding behind tool storage compartment door / Obsolete
No Ford dealer or obsolete parts vendor has any.
Left pic: Letters within circles are the specific clips, which came with the mouldings, but were also available by themselves.
Thread Starter
|
New User
Joined: Feb 2015
Posts: 21
Likes: 0
Hey thanks for the replies guys. Yeah I ment the right side tool box, I thought about that after i posted on here. So your saying no body will have it after market. I need to just find it from a individual is my best bet. Or piece by piece from eBay or something. Hey thanks for the help guys.
Moderator & parts slinger
Joined: Feb 2007
Posts: 50,247
Likes: 5,815
From: S/W Missouri, Polk county
No one reproduces it that I know of...yes a used OEM 3 piece maybe on ebay, or FTE classified, if you are lucky.
Or a used one piece and do some fab work? If the 3 piece is crazy price, maybe some fab work anyway.
There is a dvrs side bed tool box option, but it is totally custom.
Or a used one piece and do some fab work? If the 3 piece is crazy price, maybe some fab work anyway.
There is a dvrs side bed tool box option, but it is totally custom.
Hotshot
Joined: Jan 2011
Posts: 13,145
Likes: 348
From: THIS IS SPARTA!, ...Mo.
You can use the one piece. With the door closed, nobody will notice. This is my truck with the one piece on the door.
I found the three piece set at a junk yard, but it took lots of patience and looking. (No, it's not for sale)
I found the three piece set at a junk yard, but it took lots of patience and looking. (No, it's not for sale)
Trending Topics
Thread Starter
|
New User
Joined: Feb 2015
Posts: 21
Likes: 0
It would help if I know which side was left and which side was right woulnt it? lol.
I tried to post on the wanted parts adds on here and I wouldn't let me, any idea why that might be?
And thanks for the one piece trim option I will keep that in mind! Might end up doing that if all else falis. It doesn't look to bad. Nice looking truck by the way!
I tried to post on the wanted parts adds on here and I wouldn't let me, any idea why that might be?
And thanks for the one piece trim option I will keep that in mind! Might end up doing that if all else falis. It doesn't look to bad. Nice looking truck by the way!
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
Moderator & parts slinger
Joined: Feb 2007
Posts: 50,247
Likes: 5,815
From: S/W Missouri, Polk county
I think you need at least 25 posts?
....And that tool box was put into the bed side and then hit by a car and repaired again.
Alice is a looker for sure and now a "8 lugger".
I have some of that trim (sorry one piece long bed, no 3 piece) I will look tomorrow and get some pics to tell the difference for you.
....And that tool box was put into the bed side and then hit by a car and repaired again.
Alice is a looker for sure and now a "8 lugger".
I have some of that trim (sorry one piece long bed, no 3 piece) I will look tomorrow and get some pics to tell the difference for you.
Thread Starter
|
New User
Joined: Feb 2015
Posts: 21
Likes: 0
No big deal. We're fixing to that that much here in Indiana.
I'd like to know if you cut it, if it would look very good or not. I have some old beat up trim like that I pulled off a truck so I might cut in to it an see if you can just fab it up with the one piece.
I'd like to know if you cut it, if it would look very good or not. I have some old beat up trim like that I pulled off a truck so I might cut in to it an see if you can just fab it up with the one piece.
Thread Starter
|
New User
Joined: Feb 2015
Posts: 21
Likes: 0
just got off the phone the Dennis Carpenter and they said they are going to start selling the 3 pieces moldings for the factory tool box in the next couple months! He said they placed a order like 6 months ago to start making them and he said there supposed to be able to start selling them in the next couple months. thought you guys might like to know that. So i'll just wait for those to come in.
Senior User
Joined: Aug 2013
Posts: 133
Likes: 0
From: San Diego
I have just pulled all the "crown molding" from my truck as I intend to go without it, I prefer the clean look. This includes the 3-piece for the RIGHT side toolbox. How much is this stuff worth?
Mine is in very good shape, let me go take a pic of it...
Mine is in very good shape, let me go take a pic of it...