Front Leaf Springs?

Reply Subscribe

Thread Tools

Search this Thread

#16

03-01-2015, 06:27 PM

brian42

Lead Driver

Join Date: Dec 2006

Location: San Diego, CA

Posts: 7,059

Likes: 150

Received 119 Likes on 79 Posts

Quote:

Originally Posted by Kingkong0192

To deal with the bolt being too long to get by the radiator mount i just pushed it out as far as i could, cut the bolt with an angle grinder, then air hammered the rest of the bolt out. Put the new bolt in with the nut facing the radiator support and that whole situation was dealt with.

I took the lower radiator mount off (while supporting the radiator with my hand), removed the bolt and put the mount back on. To install the bolt I did the same process. It took a little longer to get done but I kept the bolt at full length.

Reply Like