The Monster's tail (title fixed)
#1
The Monster's tail (title fixed)
I figured it was time to start a build thread on my trailer.....most have seen some of the pictures. I thought it would be nice to have them all in one place.
So here goes......
Here is the bed I bought for my trailer it has some damage on the right rear corner, but repairable.
It's is a reading 9' aero bed off a superduty.
I also picked up a sterling 10.5 for a custom trailer axle.
Here's it cut up to save weight (saved about 80-85lbs)
Here's the right rear damage, inside of box was totaled had to cut it out.
Had to remove the panel to knock dents and unfold it
Not perfect but a lot better
Steel for the frame(wife picked it up while I was on the road, in our car)
So here goes......
Here is the bed I bought for my trailer it has some damage on the right rear corner, but repairable.
It's is a reading 9' aero bed off a superduty.
I also picked up a sterling 10.5 for a custom trailer axle.
Here's it cut up to save weight (saved about 80-85lbs)
Here's the right rear damage, inside of box was totaled had to cut it out.
Had to remove the panel to knock dents and unfold it
Not perfect but a lot better
Steel for the frame(wife picked it up while I was on the road, in our car)
#2
#3
#4
Trailer has been on hold($$$) for awhile but it's been a brown, FedEx, and wife delivering parts.
The wife being funny
New wheels
New(military take offs 99% thread left)
B-codes got these for $100
Couldn't find hangers anywhere, so order them from ford
Tears will be in next week
The coupler I'll be using in conjunction with the disk on custom axle.
All over kill, hitch rated for 7k chains rates for 10k only looking for trailer to be at 5k
Bushings
All the new leds, clears are for the front end of the x
Oh and seals for front diff are in there also....
Now I just need time home to get it put together.....
The wife being funny
New wheels
New(military take offs 99% thread left)
B-codes got these for $100
Couldn't find hangers anywhere, so order them from ford
Tears will be in next week
The coupler I'll be using in conjunction with the disk on custom axle.
All over kill, hitch rated for 7k chains rates for 10k only looking for trailer to be at 5k
Bushings
All the new leds, clears are for the front end of the x
Oh and seals for front diff are in there also....
Now I just need time home to get it put together.....
#5
#7
Trending Topics
#8
#9
#10
#11
#14
#15