spindle bearings
Thread Starter
|
Mountain Pass
Joined: Mar 2012
Posts: 210
Likes: 19
From: Southeast MI.
spindle bearings
I'm starting to get my parts list together for doing my spindle bearings this spring. I have found a lot of good info on you-tube on how to do this. I know which bearing kit is needed, but i was thinking, while i'm in there why not do the front u-joints and replace the output shaft seals while i have everything else out. does anyone know the u-joint, output shaft seal numbers?
1993 4.0L 5spd, I have seen a u-joint part number is the spicer 5-760x is that for all 3 on the front?
timkin sbk4 bearing kit for the spindle bearings. (2 total)
any advice or anyone with tips on this i'd like to hear it.
1993 4.0L 5spd, I have seen a u-joint part number is the spicer 5-760x is that for all 3 on the front?
timkin sbk4 bearing kit for the spindle bearings. (2 total)
any advice or anyone with tips on this i'd like to hear it.
Thread
Thread Starter
Forum
Replies
Last Post
colt1221
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
2
Dec 15, 2012 09:43 AM
t4kne
Clutch, Transmission, Differential, Axle & Transfer Case
3
Jun 22, 2003 12:22 PM
FordPerf300
Clutch, Transmission, Differential, Axle & Transfer Case
4
Sep 12, 2002 12:16 PM
