Heater Control Cables
Thread Starter
|
New User
Joined: Dec 2014
Posts: 17
Likes: 0
Heater Control Cables
FTE Family,
Helping a friend with a 1987 F-350 rollback, which has been sitting for several years. Both A.C./heater cables are intact, but both having cracked plastic snap-in parts that attach to the control head. Cables are stiff, but the mode control and blend doors move freely. Do any of y'all know of a source for these cables? Rather than vacuum controls, the mode assembly is mechanicly controlled. The only vacuum-controlled part is the recirculating door.
I tried the Green Ford Parts website, but I do not have a part number. Thanks in advance,
Johnny
Helping a friend with a 1987 F-350 rollback, which has been sitting for several years. Both A.C./heater cables are intact, but both having cracked plastic snap-in parts that attach to the control head. Cables are stiff, but the mode control and blend doors move freely. Do any of y'all know of a source for these cables? Rather than vacuum controls, the mode assembly is mechanicly controlled. The only vacuum-controlled part is the recirculating door.
I tried the Green Ford Parts website, but I do not have a part number. Thanks in advance,
Johnny
Laughing Gas
Joined: May 2004
Posts: 1,062
Likes: 6
From: Dallas, TX, USA
Thread
Thread Starter
Forum
Replies
Last Post
javi2001
Cooling, Heating, Ventilation & A/C
4
Aug 9, 2007 07:27 PM
