P2196 - O2 Switch Sensor Indicates Rich
#1
P2196 - O2 Switch Sensor Indicates Rich
2007 E450 Van. Dash light came on. OBD2 reader indicates: P2196 Ford - Lack of HO2S-11 Switch Sensor Indicates Rich
I need to find out which sensor to replace. It looks like I need to replace Bank 1, Sensor 1, but I am not sure where it is located. My guess it's located on the manifold, but I'm not sure if it's driver or passenger side.
A friend says, "Look in the owners manual for the van and find out which cylinder is cylinder number 1. Cylinder 1 is always on Bank 1."
The owner's manual has no indication of where cylinder one is located. I do not have a service manual.
Can anyone help me address this issue? I am not highly technical, but I do think I can replace the sensor myself, or at least I would like to give it a try.
Thanks much,
Tom
I need to find out which sensor to replace. It looks like I need to replace Bank 1, Sensor 1, but I am not sure where it is located. My guess it's located on the manifold, but I'm not sure if it's driver or passenger side.
A friend says, "Look in the owners manual for the van and find out which cylinder is cylinder number 1. Cylinder 1 is always on Bank 1."
The owner's manual has no indication of where cylinder one is located. I do not have a service manual.
Can anyone help me address this issue? I am not highly technical, but I do think I can replace the sensor myself, or at least I would like to give it a try.
Thanks much,
Tom
#2
#4
Thread
Thread Starter
Forum
Replies
Last Post
Tomthumb47
1968-Present E-Series Van/Cutaway/Chassis
6
12-15-2014 07:27 AM
AllenCPalmer
1987 - 1996 F150 & Larger F-Series Trucks
2
08-10-2013 10:16 AM