Ignition Control Module?
Thread Starter
|
FTE Chapter Leader
Joined: Mar 2009
Posts: 12,366
Likes: 215
From: Seaside, Oregon
Ignition Control Module?
To start with the previous owner needs their tool box taken away.
The ignition control module on my 89 F-250 needs to be replaced.
The question is what module?
The previous owner did a hack job MAF conversion and mixed parts. The EEC is an X3Z from a 93 Mustang Cobra, heads are the GT40s and the distributor is a Mallory 7968704, Mallory list the replacement ICM as 613 the pictures i am seeing online are a black module ( unknown if using stock photo ) current is grey.
The power train is a 5.8 and zf42 5speed.
What are your recommendations on ICM's.
The ignition control module on my 89 F-250 needs to be replaced.
The question is what module?
The previous owner did a hack job MAF conversion and mixed parts. The EEC is an X3Z from a 93 Mustang Cobra, heads are the GT40s and the distributor is a Mallory 7968704, Mallory list the replacement ICM as 613 the pictures i am seeing online are a black module ( unknown if using stock photo ) current is grey.
The power train is a 5.8 and zf42 5speed.
What are your recommendations on ICM's.
Fleet Owner
Joined: Aug 2005
Posts: 23,667
Likes: 301
From: Easton,Ks
The 1993 Mustang 5.0L HO and 5.0L Cobra used a Ignition Control Module (ICM) system that features a "push start" mode and had a wire from the ICM to the start wiring.
So this would make it a gray ICM.
So this would make it a gray ICM.
Thread
Thread Starter
Forum
Replies
Last Post
Dannot
1987 - 1996 F150 & Larger F-Series Trucks
9
May 7, 2025 06:58 PM
1977F1504X4AUBURN
1973 - 1979 F-100 & Larger F-Series Trucks
2
Apr 14, 2011 08:20 PM
padlikehel
1987 - 1996 F150 & Larger F-Series Trucks
3
Mar 19, 2010 07:57 AM
