'05 Explorer
Thread Starter
|
New User
Joined: Oct 2014
Posts: 6
Likes: 0
From: Walton
'05 Explorer
If it wasn't for the people here I could have spent way to much money. My fresh air door had fallen in and landed on top of the fan. I read how one member drilled a small hole in the housing to move and then bolt the door. What I did was use a hole saw and drilled 2 holes near the top of the housing so that the hole didn't fall through. I was able to pry the door up over the opening and then screwed some all thread into the housing to wedge the door in place. Taped the holes and wallaa done.
Thread
Thread Starter
Forum
Replies
Last Post
