swap question
Thread Starter
|
Laughing Gas
Joined: Oct 2013
Posts: 819
Likes: 50
From: North Westren Missouri
swap question
Hello all, I am working 1985 f250 4x4 and the front (lite) dana 44 ttb and it's in bad shape. Wont hold oil for more then a few hours and vibrates heavy at speeds above 55 mph. Not to mention the gear ratio is a 3.54 and i would rather run a 4.10.
Now I come to my swap question.
Will a dana 50 ttb bolt up to the leafspring purches and stearing links on my 85?
Now I come to my swap question.
Will a dana 50 ttb bolt up to the leafspring purches and stearing links on my 85?
Moderator
Joined: Jan 2001
Posts: 56,992
Likes: 2,741
From: Virginia
Yes, the dana 50 is a bolt-in. You have to use the whole complete axle though, no swapping individual components.
I guess you know if you change the front ratio you will have to change the rear also.
I guess you know if you change the front ratio you will have to change the rear also.
Thread Starter
|
Laughing Gas
Joined: Oct 2013
Posts: 819
Likes: 50
From: North Westren Missouri
Thread
Thread Starter
Forum
Replies
Last Post
yellow78ford
Clutch, Transmission, Differential, Axle & Transfer Case
1
Apr 11, 2006 01:40 PM
MontanaFord
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
9
May 17, 2005 11:29 PM
Cowboy_351
Brakes, Steering, Suspension, Tires, & Wheels
3
Jan 29, 2002 06:53 PM
