Anyone have a source for those little rectangular clips that go on the heater box and the bolts/sheetmetal screws that hold the control cables in place? I need two of them.

 

Do you have an old carburetor hanging around? They are pretty close to the throttle and choke hold down tabs.

Or you could just make some out of a small piece of metal and pound it over a screwdriver of the same size.

 

Like these?.... Google "Ford Heater Box Clips":



Prolly the popular vendors carry them... NPD, BOTP, Mac's, etc.

 

I think he is referring to these


Most of the catalogs and probably RockAuto would have them

 

Ah. Arigato gozaimasu.

 

That's it. I will check out NAPA & Autozone.

 

378897-S78 .. Clip-Heater Cable to Plenum Chamber / Obsolete ~ 1968/72 F100/350.

GREEN SALES CO. in Cincinnati OH has 7 = 800-543-4959.

GOODE MOTOR CO. in Burley ID has 10 = 208-878-5611.

KLIMESH MOTOR SALES in Calmar IA has 13 = 563-562-3241.
---
42014-S8 .. Bolt-hex head self tapping, attaches clip to plenum chamber: #10 -12 x 5/8" long ~ Available from hardware stores.

 

HMMM. あなたは何が痛い

 

I got a 4 with clips with screws if ya can't find any loco.
Orich

 

Orich, PM sent.

Thanks all.

 

Hio, please translate.

 

Kind of away to say Thank you:
orich

 

In Japanese.
So I backed it up with "YOU'RE WHAT HURTS?" in japanese writing.

 

Thanks, since I read that I have had the song by Styx "Mr. Roboto" in my head for much of the day!

 

One of my favorite Styx tunes. Good job Abe.
*
http://www.dailymotion.com/video/x7kxo_styx-mr-roboto_music