finding correct power valve
Thread Starter
|
New User
Joined: Sep 2014
Posts: 17
Likes: 0
From: Fort Mill Sc
finding correct power valve
I have a 750 Holley vac sec on my 1968 390fe Ford motor in my 1965 F-100 truck.
Motor just rebuilt w/550 miles. Comp Cam 495 lift w/Edelbrock alum heads. I have hesitation at first throttle response. After 2000rpm motor runs great and is very strong. Told it might be power valve. Disconnect vac line to vac advance dist and I have 15 vac. Have 6.5 power valve in Holley now what should I have??
Thanks
Motor just rebuilt w/550 miles. Comp Cam 495 lift w/Edelbrock alum heads. I have hesitation at first throttle response. After 2000rpm motor runs great and is very strong. Told it might be power valve. Disconnect vac line to vac advance dist and I have 15 vac. Have 6.5 power valve in Holley now what should I have??
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
rockpile
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
36
Nov 3, 2011 08:20 PM
matt77F2504x4
Fuel Injection, Carburetion & Fuel System
2
May 27, 2004 09:58 PM
GeneStoner
Ford Inline Six, 200, 250, 4.9L / 300
2
Apr 18, 2003 02:48 AM
GeneStoner
Fuel Injection, Carburetion & Fuel System
2
Apr 17, 2003 06:28 PM
