Valve train tap...
Thread Starter
|
Tuned
Joined: Apr 2009
Posts: 307
Likes: 2
From: OR
Valve train tap...
in the pass side and have had this noise for a long time and I want to repair it. Last time with the VCs off (replacing the sticks) I didn't see a cracked arm and I'm thinking it's a bent push rod.
Do I wind the motor to TDC and wiggle #hit or ?
Do I wind the motor to TDC and wiggle #hit or ?
Laughing Gas
Joined: Aug 2006
Posts: 1,249
Likes: 11
From: oklahoma
I found a rocker lose while putting injectors in 1 of my trucks
couldn't find anything wrong with pushrods or rocker so I swapped it out for another 1 and it was fine
Don't know if the ball it rides on was wore or what because it looked fine
couldn't find anything wrong with pushrods or rocker so I swapped it out for another 1 and it was fine
Don't know if the ball it rides on was wore or what because it looked fine
Thread
Thread Starter
Forum
Replies
Last Post
canister
1999 - 2003 7.3L Power Stroke Diesel
7
Feb 20, 2010 05:32 PM
mikedc8371
1973 - 1979 F-100 & Larger F-Series Trucks
8
May 5, 2009 06:53 PM
fordguy76
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
4
Mar 30, 2005 12:07 PM
