Electric fan controls using HUG0 computer?
Thread Starter
|
Cross-Country
Joined: Aug 2008
Posts: 60
Likes: 29
From: Florida
Electric fan controls using HUG0 computer?
Has anyone messed with using the stock 94-95 F-150 5.0 computer to control an electric fan (via a relay)?
Since I have tuning software, I can build a chip that turns on the electric fan controls in the calibration. We do this for some fox body Mustangs, and it works. The question is not whether the computer can be tuned to turn the fans on... I can do that part.
The question is if anyone has ever done this? Or if anyone knows what pin the controls are on, and if there are actually any drivers on that pin.
Since I have tuning software, I can build a chip that turns on the electric fan controls in the calibration. We do this for some fox body Mustangs, and it works. The question is not whether the computer can be tuned to turn the fans on... I can do that part.
The question is if anyone has ever done this? Or if anyone knows what pin the controls are on, and if there are actually any drivers on that pin.
Thread
Thread Starter
Forum
Replies
Last Post
mattsautobody442
2004 - 2008 F150
1
May 24, 2011 11:46 AM
