electrical help!! ect sensor no power
Thread Starter
|
New User
Joined: Jul 2014
Posts: 20
Likes: 0
electrical help!! ect sensor no power
I have recently changed my ect (engine coolant temperature) sensor and now my temp gauge on the dash isnt reading. I tested the ground and power wires and the ground tripped the pin light. When i stuck the light in the power i got nothing. I tested other components and they were all making the pen light vome on so. Know i had it grouded well. What do i do now? Do i rewire it to the pcm? And wouldnt this throw a code and i have none. Worried that i shouldnt drive it like this. Any suggestions is awesome.
Fleet Mechanic
Joined: Aug 2008
Posts: 1,446
Likes: 9
From: NE Iowa JD Country
I have recently changed my ect (engine coolant temperature) sensor and now my temp gauge on the dash isnt reading. I tested the ground and power wires and the ground tripped the pin light. When i stuck the light in the power i got nothing. I tested other components and they were all making the pen light vome on so. Know i had it grouded well. What do i do now? Do i rewire it to the pcm? And wouldnt this throw a code and i have none. Worried that i shouldnt drive it like this. Any suggestions is awesome.
Thread
Thread Starter
Forum
Replies
Last Post
pineconeford
1948 - 1956 F1, F100 & Larger F-Series Trucks
16
Jul 18, 2014 07:28 PM
