<hr style="color: rgb(255, 255, 255); background-color: rgb(255, 255, 255);" SIZE="1">I just picked up some seats from a 98 expy to put in my 99 xl super cab with a solid bench seat.. The drivers side is electric. all I have is the wires for the seat belts What do I need for the seat motor. Just a 12v fused wire and a ground. there is a 4 wire plug on the seat. I did get the plug for it.


Ok the seat belt pluged right in. Now I have a black wire and a green wire. I asume green hot black ground?<!-- google_ad_section_end -->

 

green hot, black ground. Run a wire (12-14ga minimum) from the battery to it. Be sure to fuse it close to the battery. I'd start with a 15 amp fuse.