DPFE Sensor 99 Explorer v8. Tips Tricks?
Thread Starter
|
Senior User
Joined: Oct 2013
Posts: 189
Likes: 0
DPFE Sensor 99 Explorer v8. Tips Tricks?
Alright friends I need advice....again.
I have another thread on this but sheesh...it's impossible.
This DPFE sensor is a real b...h to get.
The 12pt screw is wedged between the sensor and a bracket.
Hoses hard to reach let alone hook up.
Was at the dealer for a brake flush and the techs hate this job.
They want 1.5 hour pay.
Who has done this?
Have a box wrench...nope. Can't get a socket in there?
Did you take the hood off and hang from the rafters?
Do I have to bent a bracket?
What a stupid place for a sensor.
Have any tips for this guy?
Would appreciate some more input.
Hey...thank you.
Drew
I have another thread on this but sheesh...it's impossible.
This DPFE sensor is a real b...h to get.
The 12pt screw is wedged between the sensor and a bracket.
Hoses hard to reach let alone hook up.
Was at the dealer for a brake flush and the techs hate this job.
They want 1.5 hour pay.
Who has done this?
Have a box wrench...nope. Can't get a socket in there?
Did you take the hood off and hang from the rafters?
Do I have to bent a bracket?
What a stupid place for a sensor.
Have any tips for this guy?
Would appreciate some more input.
Hey...thank you.
Drew
Thread
Thread Starter
Forum
Replies
Last Post
