Hi; I have a 1962 F100 Unibody that I took apart a couple of years ago. I recently put the 390 motor back in it and was putting the radiator support back in when I realized I didn't remember or have picture of what order the springs, washers, and nuts go in. The square flat washer is also a nut. I have asked all over and bought a CD that covers all Ford truck parts and assembly pictures in it from 1957-1963. No picture of the bolt. I am enclosing a picture of the assembly. Any help would be greatly appreciated.

Weez-L

Guess I won't include the picture, it won't let me. It is in my pictures file and doesn't have an address.

 

............

 

THANK YOU SO MUCH!!!!! This is the only diagram that I have seen that actually shows the bolt and spring. I have the parts and they are in good shape, I just didn't know what order they went in. Thanks again, Weez-L

 

Do you, by any chance, know how much to compress the spring?

 

The pic in post 2 is from the hipoparts.com C/D of the 1957/63 Ford Truck Parts Catalog.

I don't know how much to compress the spring.

Here's another pic from the hipoparts.com C/D of the 1964/72 Ford Truck Parts Catalog:

 

THANKS AGAIN.

 

I added a pic, take a look-see at post 5 again.

 

THANKS AGAIN, Bill