excursion thrust washers....
Thread Starter
|
Freshman User
Joined: May 2013
Posts: 39
Likes: 0
excursion thrust washers....
Have a 2000 ex v10 4x4 we are in the process of putting a new entire front end on it, tie rods, ball joints, drag bars, etc,
Were almost done we did the driver side first, no issues well the passenger side has 2 round thrust washers with a hexagon one, and a gray plastic looking on which is for the vacuum for 4 wheel drive....there all good...no wear etc...
My question there was none of this on the driver side I don't even remember there being a vacuum line on the driver side, are they missing or am i missing something.....
Were almost done we did the driver side first, no issues well the passenger side has 2 round thrust washers with a hexagon one, and a gray plastic looking on which is for the vacuum for 4 wheel drive....there all good...no wear etc...
My question there was none of this on the driver side I don't even remember there being a vacuum line on the driver side, are they missing or am i missing something.....
Thread
Thread Starter
Forum
Replies
Last Post
Truluck
Excursion - King of SUVs
4
Jul 31, 2008 09:00 AM
FireTail-AR
Excursion - King of SUVs
3
Jun 11, 2007 09:29 PM
