Cranking issue
Thread Starter
|
More Turbo
Joined: Jan 2011
Posts: 699
Likes: 20
Cranking issue
I have put new batteries and a new starter and am still having occasional starting issues. All ficm ipr icv are good. When I went to start today the engine was turning over very nicely but the scanguage showed rpm was only 44rpm? It was definitely turning quicker than that. When the numbers shot to 150+ it cranked right up but the sound was the same. All the other numbers looked good.
What sensor would show the rpm that low? I'm at a loss. It started fine after that the rpm while cranking was 240 rpm.
What sensor would show the rpm that low? I'm at a loss. It started fine after that the rpm while cranking was 240 rpm.
Thread
Thread Starter
Forum
Replies
Last Post
