7 pin Blade connector issues
Thread Starter
|
Senior User
Joined: Jan 2011
Posts: 120
Likes: 1
7 pin Blade connector issues
Having a heck of a time getting the wiring figured out for my trailer. When I bought my truck the 7 pin blade connector was banged up so I bought a new one and wired it up. Only problem is that I;m not getting power to most of the pins. I get running lights and the right turn signal. Thats it. I've even unplugged the factory wiring harness to eliminate that as a problem Any ideas of what else to check to check? Fuses? Relays?
Postmaster
Joined: Sep 2007
Posts: 4,195
Likes: 6
From: Medford Oregon
Go to section 18.1 and you can look under "Electrical Diagrams" to see how everything is wired up. Think it also has pin out on trailer plug.
1996 Bronco/F-Series Workshop Manual
1996 Bronco/F-Series Workshop Manual
Postmaster
Joined: Sep 2007
Posts: 4,195
Likes: 6
From: Medford Oregon
Thread Starter
|
Senior User
Joined: Jan 2011
Posts: 120
Likes: 1
Well I checked out the under hood fuse box. I had a blown 10 amp fuse which controlled the left blinker and brake lights I believe, and also had a blown 30 amp max fuse which controlled the rest. Replaced those and everything seems to be working like it should now. Thanks for your help
Thread
Thread Starter
Forum
Replies
Last Post
Bigpapa346
Electrical Systems/Wiring
3
Apr 25, 2012 08:59 AM
professor08
1987 - 1996 F150 & Larger F-Series Trucks
2
Jul 8, 2008 11:06 AM
