t-18 top cover rebuild ?
#1
t-18 top cover rebuild ?
Hey guys , im rebuilding my t-18 and I took the top cover apart to address the sloppy shifter problem. Now 're assembly im sure is going to be a pain and time consuming I took some pictures of it assembled. But i would like a diagram. Is there anything on this? I order the kit from Novak which includes all the parts for the top cover but they didn't even talk about the top cover. I wrote them a e-mail a little annoyed.
#5
ok guys i am in the middle of the rebuild and there are still a lot of un answered question. numberDummy thanks for the diagram it helped some. after searching i found some one who has done this too.
The FORDification.com Forums • View topic - Making a T18 top end nice and tight: canes and top covers.
page 3 has the most useful information if your just doing a rebuild.
had some broken springs, its a wounder how it didnt cause more damage through out the trans.
The FORDification.com Forums • View topic - Making a T18 top end nice and tight: canes and top covers.
page 3 has the most useful information if your just doing a rebuild.
had some broken springs, its a wounder how it didnt cause more damage through out the trans.
Thread
Thread Starter
Forum
Replies
Last Post
thedieselkid
6.0L Power Stroke Diesel
11
01-15-2017 04:30 AM
amishbuggy116
Clutch, Transmission, Differential, Axle & Transfer Case
1
08-30-2010 03:33 PM
Superdave
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
2
09-04-2003 01:35 PM