hot lightswitch

Reply Subscribe

Thread Tools

Search this Thread

Feb 12, 2014 | 01:27 PM

dutchford150

Thread Starter

Freshman User

Joined: Feb 2005

Posts: 28

Likes: 0

From: netherlands

hot lightswitch

I have a 95 f350 and the lightswitch gets hot as hell after 25 minutes when the lights are on
is there a way so it does not overheat?

regards George

Feb 12, 2014 | 01:37 PM

stainlessstroker95

Postmaster

Joined: May 2011

Posts: 3,447

Likes: 0

From: Monroe City in

Lmc truck has a harness to help prevent that. But you may want to go ahead and replace the switch too.

Feb 12, 2014 | 02:45 PM

DarkStarMedia

Posting Guru

Joined: Nov 2011

Posts: 1,664

Likes: 4

From: Southern AZ

Yea, Change the switch before it melts. That usually means that the switch is dieing.

Richard

Feb 13, 2014 | 07:13 AM

echo95

Senior User

Joined: Nov 2004

Posts: 173

Likes: 0

From: Lakewood, Washington

The LMC truck headlight wiring harness is an easy fix as it removes the current that runs through the switch through a remote relay instead. There are others that fabbed up a harness as well with heavier gauge wiring.

Feb 13, 2014 | 11:14 AM

stainlessstroker95

Postmaster

Joined: May 2011

Posts: 3,447

Likes: 0

From: Monroe City in

Truck Parts and Truck Accessories

Feb 13, 2014 | 11:30 AM

thomabb

Cargo Master

Joined: Apr 2010

Posts: 2,405

Likes: 4

The heat is a symptom of the contacts inside the switch are in bad shape. Whatever you do, you should also replace the switch.

Feb 13, 2014 | 12:32 PM

dutchford150

Thread Starter

Freshman User

Joined: Feb 2005

Posts: 28

Likes: 0

From: netherlands

thanks guys for the quick response

I will go for the new harness and switch

grts George

Trending Topics

This is prolly a 1 page thread at most

110.2k

6M
Bad trouble with axle shaft snap ring

28

351
Truck slump

19

542
Brake upgrade worth it

16

340
1989 F-150 R-12 to R-134a

18

315

Feb 13, 2014 | 04:27 PM

paddler

More Turbo

Joined: Dec 2002

Posts: 664

Likes: 129

From: Columbia, MD

Another vote for LMC harness

No cutting of existing wiring. Plugs into existing headlight bulb plug on one side, then connect to battery positive and ground. Other existing headlight plug gets disconnected and not used. Harness has "new" plugs, controlled by the relay.

Quick, easy, and rather foolproof.

You can assemble a functional equivalent for less, but without the "bulb plug" in the harness, you'll have to cut into the light wiring on both sides.