Is it just me???
Thread Starter
|
Senior User
Joined: Aug 2013
Posts: 437
Likes: 0
From: Muskogee Oklahoma
Is it just me???
Is It just me or do the F series cup holds SUCK!!!
Im the kinda guy that loves Fountain drinks - DP With Vanilla is the drink of choice... Anyway Friday nights - Saturday nights I love to grab a pack of Cigs (MB Reds) and a Fountain and cruse up in down main.... At least once a night I have some jack azs pull out in front of me and I have to slam on the brakes - The first time this happened with my f350 I was just starting to pull out of the fueling station and had a fresh (Dp) - My (Dp) Went flying into the floor board- *I DIDIN EVEN GET A SIP* Iv lost a few good drinks since then as well.
So am I the only one with this problem or do the cup holds in our trucks suck?
Iv been thinking about pulling the middle seat and making some kinda console section. Anyone Done anything like this?
Im the kinda guy that loves Fountain drinks - DP With Vanilla is the drink of choice... Anyway Friday nights - Saturday nights I love to grab a pack of Cigs (MB Reds) and a Fountain and cruse up in down main.... At least once a night I have some jack azs pull out in front of me and I have to slam on the brakes - The first time this happened with my f350 I was just starting to pull out of the fueling station and had a fresh (Dp) - My (Dp) Went flying into the floor board- *I DIDIN EVEN GET A SIP* Iv lost a few good drinks since then as well.
So am I the only one with this problem or do the cup holds in our trucks suck?
Iv been thinking about pulling the middle seat and making some kinda console section. Anyone Done anything like this?
Cargo Master
Joined: Nov 2006
Posts: 2,171
Likes: 20
From: Denton, TX
Which seats do you have? Not that it matters, pretty sure the cup holder sucks regardless.
I have the 40/20/40 center console paint shaker edition. If the bottom of the cup holder can't be drilled out to be made deeper, maybe the floppy rubber ears can be cut out and some sort of cylindrical insert can make it seem deeper?
I'll watch this thread to see what you come up with!
I have the 40/20/40 center console paint shaker edition. If the bottom of the cup holder can't be drilled out to be made deeper, maybe the floppy rubber ears can be cut out and some sort of cylindrical insert can make it seem deeper?
I'll watch this thread to see what you come up with!
Elder User
Joined: May 2011
Posts: 556
Likes: 0
From: Elyria, Ohio
I have the 40/20/40 cup holders. What i did is i went to walmart and bought the plastic cup holders that have the little plastic that you can put in the window and i cut that piece off and have them sit in the cup holders works fine with big fountain drinks.
Thread Starter
|
Senior User
Joined: Aug 2013
Posts: 437
Likes: 0
From: Muskogee Oklahoma
I think I got The same kind yall got - My console is on the back side of the middle seat. (Anything bigger then a can of pop has problems) I think Im gonna make some kinda entertainment system or such IDk. Im looking at ideas now.
Thanks yall.
Thanks yall.
Senior User
Joined: Dec 2008
Posts: 141
Likes: 0
Darn good idea! I might modify the holders in my F150.
Elder User
Joined: May 2011
Posts: 556
Likes: 0
From: Elyria, Ohio
Custom Accessories 91117 - Beverage Holder | O'Reilly Auto Parts
I got something like these but at walmart i think 4 for one dollar. But i just cut that little plastic tab off it works fine.
I got something like these but at walmart i think 4 for one dollar. But i just cut that little plastic tab off it works fine.
Tuned
Joined: Apr 2009
Posts: 307
Likes: 2
From: OR
Trending Topics
Senior User
Joined: Jul 2013
Posts: 154
Likes: 0
From: Odessa
Its a little off the starting topic but will the 99 svt lightning seats bolt in to a 95 f350 crew cab. I want to put them in both the front and back rows.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
lost
Joined: Apr 2003
Posts: 290
Likes: 0
From: Worland, WY
I've dumped quite a few drinks on the floor of OBS trucks as well. I hate the stock cup holders. I ended up putting in a F-150 center console and I love it. Best interior mod yet in my book. Here is the link to my thread.
New User
Joined: Feb 2012
Posts: 19
Likes: 0
From: Blacksburg,VA
In the past I have used the 4 for $1 Bell/Wally World cup holders, retrofitted a cup holder designed for a boat, and used the magnetic beer can holder from my riding mower to keep drinks in their place. While all a bit crude they do the job a la function over form etc...
I must say after seeing the thread regarding the newer F series console once before by Mr. Chris56ford I am electing to go this route in the up coming summer (fingers crossed...) when I lightly update the interior on my 95 PSD. I think its a great idea
.
Craig
I must say after seeing the thread regarding the newer F series console once before by Mr. Chris56ford I am electing to go this route in the up coming summer (fingers crossed...) when I lightly update the interior on my 95 PSD. I think its a great idea
.Craig
Thread Starter
|
Senior User
Joined: Aug 2013
Posts: 437
Likes: 0
From: Muskogee Oklahoma
In the past I have used the 4 for $1 Bell/Wally World cup holders, retrofitted a cup holder designed for a boat, and used the magnetic beer can holder from my riding mower to keep drinks in their place. While all a bit crude they do the job a la function over form etc...
I must say after seeing the thread regarding the newer F series console once before by Mr. Chris56ford I am electing to go this route in the up coming summer (fingers crossed...) when I lightly update the interior on my 95 PSD. I think its a great idea.
Craig
I must say after seeing the thread regarding the newer F series console once before by Mr. Chris56ford I am electing to go this route in the up coming summer (fingers crossed...) when I lightly update the interior on my 95 PSD. I think its a great idea
.Craig
I plan on doing hotshoting with my truck on down the line and I wanna make it luxurious as I can.
I think I will us some kinda bucket seating in the front and keep the bad the way it is.
Thread Starter
|
Senior User
Joined: Aug 2013
Posts: 437
Likes: 0
From: Muskogee Oklahoma
My 92 ford f350 had these type. There awsome.
Senior User
Joined: Jun 2010
Posts: 141
Likes: 0
I went the DIY store. Bought a piece of PVC pipe with an OD that was a very snug press fit into the cup holders. Cut it about 3/4 inch taller than the cup holder. Painted it black. It will hold the typical 44 oz drink cup. Works very well. Spilled one to many drinks in short order.
Fleet Mechanic
Joined: May 2005
Posts: 1,739
Likes: 14
From: Vale, NC
I went the DIY store. Bought a piece of PVC pipe with an OD that was a very snug press fit into the cup holders. Cut it about 3/4 inch taller than the cup holder. Painted it black. It will hold the typical 44 oz drink cup. Works very well. Spilled one to many drinks in short order.