I still have the 460 exhaust manifold if anybody wants it

 

I have a set of dually simulators (stainless steel bowls and centers with lug nut caps) for the US bolt pattern rims. They fit dually pickups and E-350 RV/ambulance duallys, the pickups up through 1997, don't know about the E-350. Lug nut size is 1-1/16" across flats. For any distance, pay shipping.

 

I'm looking for one of these, if anyone has one. Lower air box snorkel for a 460.

 

Looking for a vacuum tank/vacuum reservoir/coffee can (whatever you want to call it) for a '95 I6 F150. Mine rusted out, and it doesn't seem to be at the parts stores.

 

for a 1996 F350 4X4 std cab lb, blue interior. Front winch bumper can be anything that will fit. Would like to see pics. Thanks!

 

I'm looking for A/C vents for a 94 f150, any number would work. Thanks!

 

looking for the a/c condenser not sure if they are all the same but i have a efi 4.9l F150

 

Condensers should never be replaced with used units. Get a new one.

 

Good to know. My truck didnt have one when I bought it

 

They take all the debris from failed A/C compressors and contaminate the new units, which end up failing too. Do a search on black death in a/c systems and you'll get what I'm talking about.

 

I am looking for the 7 way wiring harness This one plugs in right at the rear bumper 2 plugs on one end and the 7 way on the other Thanks

 

Hi everyone,
I still have some used Ford parts to go to a good home. These will fit a 351W 5.8L V8. They came off an '88, but will fit others as well.

(1) distributor cap
(1) ignition coil
(1) rotor
(1) ignition control module
(1) 94.5 inch micro v belt (some cracks)
(1) 91.25 inch micro v belt (almost new)

Also non engine related:

(2) door glass (& handles I think) - spoken for
(1) fuel sending unit from the rear tank (I think...)
(1) track bar for F350

Hopefully someone can use these parts that I have no truck for anymore

 

I'd use this. My thought is to make it adjustable. PM sent. Thanks!

 

Do You still have it. I Am in Austin, Tx

 

Aluminum rivet-on rail caps available
Could be the bit of flash your truck needs....