Tech question;
Thread Starter
|
Tuned
Joined: Jan 2014
Posts: 340
Likes: 21
From: Weaverville NC
Tech question;
Would some one tell me why the intake & exh mnfld are bolted together on my 240 ci 6. I had a '62 Falcon and the two manifolds were one casting. The motor was a 170 ci 6. Great motor. It had an aluminum piece under the carb. One heater hose was piped to it. The hot anti-freeze either was going to the heater core or returning to the motor, I am not sure. Was this doing the same thing as on my 240 intake&exh. being bolted together? Will I need to make it so a heater hose runs thru another alum. block ( that bolts under the carb.)and warms the carb/gas as in my '62 Falcon, ( once I put split exh. mnflds on) or not? 
Thread
Thread Starter
Forum
Replies
Last Post
crazed87bronco
1961 - 1966 F-100 & Larger F-Series Trucks
12
Dec 27, 2011 07:46 PM
cbfomoco
1967 - 1972 F-100 & Larger F-Series Trucks
3
Apr 12, 2009 05:16 AM
joestratton1
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
Feb 16, 2009 08:48 AM
MichaelJB
1967 - 1972 F-100 & Larger F-Series Trucks
1
Jul 23, 2003 02:41 PM
