Swapping front
Elder User
Joined: Apr 2002
Posts: 530
Likes: 0
Swapping front
I don't really think this would be possible, but who knows, that's why I am asking.
I like how the front of my truck looks, but I prefer the 80-86,92-96 fronts. I was wondering is it possible to basically take the front off of mine and swap it with the front of another?
If it is possible what would I have to change?
I like how the front of my truck looks, but I prefer the 80-86,92-96 fronts. I was wondering is it possible to basically take the front off of mine and swap it with the front of another?
If it is possible what would I have to change?
Tuned
Joined: Jan 2002
Posts: 253
Likes: 0
From: BC Canada
Swapping front
yes the 92-96 fits. there is a place up here that does them. www.jobriteauto.com i believe. they have some pics of them too. i am not sure about the older ones.
hope that helps.
i like the 91 front end though.
Rusty.
hope that helps.
i like the 91 front end though.
Rusty.
Elder User
Joined: May 2001
Posts: 662
Likes: 0
From: washington
Swapping front
This can be done. If you try the website www.jobriteauto.com a guy took the 91 style front clip and swapped it with a 96 style. The 87-96 trucks had a different style bed so if you go with a 80-86 style front clip it wont look quite the same.
Elder User
Joined: Apr 2002
Posts: 530
Likes: 0
Swapping front
[updated:LAST EDITED ON 07-Jun-02 AT 07:29 PM (EST)]I can't really seem to find what it would be under, what should I look under to find it?
Just to make sure ya'll know what I am talking about and not thinking about somethign else, I just wanna get rid of the blocky front where the grille is on the front, nothing else.
Just to make sure ya'll know what I am talking about and not thinking about somethign else, I just wanna get rid of the blocky front where the grille is on the front, nothing else.
Freshman User
Joined: Jun 2002
Posts: 43
Likes: 0
From: Baden USA
Swapping front
While I think it might work physically, the curve of the front on a 92 - 96 means that the hood, bumper, and I think even the fenders are curved differently. I've been toying with the idea of changing just the bumper ( I like the one with the holes in it). It may require changing everything forward of the cab to get it to look the way you want. Then again, the grill sticking out past the hood might be interesting.
Ziggy
Ziggy
Elder User
Joined: May 2001
Posts: 662
Likes: 0
From: washington
Swapping front
Ohh I guess we were typing the same message at the same time.. Ohh well. Yes you will need to swap the fenders, hood, valance, grill, bumper, and possibly the inner fender wells.
Trending Topics
Elder User
Joined: Apr 2002
Posts: 530
Likes: 0
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Freshman User
Joined: Jun 2002
Posts: 43
Likes: 0
From: Baden USA
Swapping front
The valence is the little peice of metal under the grille and above the bumper. I'm pretty sure that the radiator supports are the same though. I bought a newer (92-96) radiatore support for my 87, but didn't install it yet. I did measure a lot at the junk yard though, and they seem to be the same.
Ziggy
Ziggy
