PS Flush gone bad?
Thread Starter
|
Junior User
Joined: Sep 2002
Posts: 63
Likes: 0
From: Orange County, NY
PS Flush gone bad?
Just did the power steering flush. As I introduced the fresh Mobil 1 ATF right away... the discharge of old and new fluid gradually became aerated & foamy till I had used up three quarts of new Mobil 1. Never stopped being a foamy discharge throughout the procedure. Now I have NO power steering...and brake pedal chirps. Any ideas?
Laughing Gas
Joined: Aug 2009
Posts: 1,192
Likes: 7
From: Belgrade, MT
Air
if the tank is roughly full to the full mark, the air will disapate over time, mine was a little noisy/foamy for about 20 or 30 minutes afterwards, i just let it idle and it settled out.
Thread Starter
|
Junior User
Joined: Sep 2002
Posts: 63
Likes: 0
From: Orange County, NY
Thanks onelionhumter. Yes, took about an hour of idling after flush for me to get my steering back and brake pedal to settle back to normal. Now I'm hoping the drone/whining goes away.
Thread
Thread Starter
Forum
Replies
Last Post
cpye2
1999 - 2003 7.3L Power Stroke Diesel
17
Mar 10, 2016 09:40 AM
RedBoat
1999 - 2003 7.3L Power Stroke Diesel
15
Jun 30, 2009 07:15 AM
bonesbut
1999 - 2003 7.3L Power Stroke Diesel
9
Oct 21, 2006 01:59 PM
