Superchips Microtuner
Thread Starter
|
New User
Joined: Nov 2002
Posts: 5
Likes: 0
From: Altoona usa
Superchips Microtuner
As of now, I have an Dynomax 4" turbo back and a drop in K@N filter with some homemade airbox modifications. My question ism what to expect when I pick up my chip tommrow at the shop? Cause I plan on loading the chip in the parking lot 
. I will be only using the 60HP program....
2003 F-250 PSD SC, 4x4
. I will be only using the 60HP program....2003 F-250 PSD SC, 4x4
Senior User
Joined: Apr 2002
Posts: 211
Likes: 0
From: Reno USA
Superchips Microtuner
With the exhaust system you have you can run the 80 hp program, but either way 60 or 80, you'll love the improvement!! If you haven't programed it before, it's as easy as 1,2,3. You can do it from the drivers seat in about 6-7 min. Think about getting a Pyro, Boost and transmission gauge set to keep any eye on things. Have fun!
Elder User
Joined: Dec 2001
Posts: 713
Likes: 0
From: C H I C A G O
Superchips Microtuner
I agree with the statement above. If you are just gonna drive around , without pulling a trailer ,you should be fine with the 80hp program, But I would get some gauges to keep an eye on the motor. If you plan on towing anything , I would switch to the 60hp program, just to be on the safe side.....
