When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
correct main jet size for autolite 1100 on 300 ci ?
Hi all, I am hoping I can get some advice for getting the correct main jet size on my 1965 F100 300 ci 6 cylinder engine. I am doing a carb rebuild, and want to make sure I have the correct size jet in my carb. This is an Autolite 1100 manual choke carb. It currently has a 67 jet which seems too rich. I live in Salt Lake City at about 4,500 ft elevation.
Any advice on correct size or links to sites with tech info would be appreciated!
Hi all, I am hoping I can get some advice for getting the correct main jet size on my 1965 F100 300 ci 6 cylinder engine. I am doing a carb rebuild, and want to make sure I have the correct size jet in my carb. This is an Autolite 1100 manual choke carb. It currently has a 67 jet (M/T 5,000-10,000 ft.) which seems too rich. I live in Salt Lake City at about 4,500 ft elevation.
BELL-MCCALL CO. in Hamilton MT has ONE = 406-363-2011.
KINSEL L/M in Beaumont TX has TWO = 800-816-2894.
NOS PARTS LTD in Waxahachie TX has TWO = 972-937-2201.
KARLSON MOTORS in Ketchikan AK has FOUR = 907-225-9022.
----------------------------------------------------------------------- C3TZ-9533-D .. Jet #67F ~ 5,000-10,000 ft. (Motorcraft CJ-139) / Obsolete