Hey guys, im lookin at a set of doors and a hood off of a 1976 Ford F-600 and am wondering if they would fit on my 77' F-350 Supercab. im 95% sure the doors will fit, 75% sure the hood will fit. Can anyone help??

 

Yes they should....and even the F600 front fenders on your cab, whole new meaning to "wide body".

 

Oh man...I'm picturing a raptor style dent side using the f600 fenders on a pick up. Come on someone do it.

 

The doors are the same with the exception of the outer door latches are different and will not interchange. The F600 uses a push button latch release, basically grab handle and push button with thumb. I believe this was done to ease entry due to the height of the large truck line. Its also a nice feature for a lifted dentside.

The hoods are also the same.

 

I have these push button handles on my 74 f250 crew cab. Unfortunately they are all there except the drivers door. someone swapped the door out at some time. would love to find another one. I will look into the f600. good to know they were on something else. I have been looking for a while!

 

Glad the info was helpful!
Are your rear crew doors push button also?

All the medium/ heavy dentside line have these doors, that I know of...& are usually in better shape in my experience.

 

Yeah the rear doors are push button. They don't appear custom at all. I am pretty sure they are original to this beast.

 

Welcome to FTE! There's a lot of good knowledgeable people here!

Your avatar looks to show a crew with a flareside bed?!?!?

 

No it's a logger box. Common up north. I would
Love to find a short box with minimal rust however that is like finding a unicorn up here.

 

Rust is the same in my area....they are either rotten or really nice with a nice high price to match.

 

The only thing with using the F600 fenders is you get that super wide, fugly (in my opinion at least) grill to go with it.

Here's a "raptor" style dent with some 5.5" wider per side fenders for ya.

 

Haunestly, I think it would look kinda cool for a 4x4... Like lifted with 40's or 44's. That is for the idea and pictures

 

There's been guys on here who have done the F600 grill. The guy with the silver, 4 door bronco comes to mind.

This guy:
https://www.ford-trucks.com/forums/1...s-recipes.html

 

For those who don't know what the door look like, here's a picture of them on one of our old F600 Lime trucks. I believe it's a 73 with a 330HD and two speed rear end.

 

The fenders and grille come down way past the bottom of the cab, so I'm not sure how well F-600 fenders and a grille would work. I guess with enough fabrication it could be made to work, but I agree with chasetruck, it would probably be fugly.