Scan Gauge II mount
Thread Starter
|
Senior User
Joined: Nov 2003
Posts: 332
Likes: 0
From: NH
Scan Gauge II mount
For those of you who have used the cubby pocket, how did you route the cord? I am guessing drilling a hole in the back of it.
When you program these make certain your inputs are correct! I scared the S*** out of myself today. I missed a number on the EOT and it made my ECT EOT temps around 35 degrees apart! Thankfully I figured out my screw up. Good scare however.
When you program these make certain your inputs are correct! I scared the S*** out of myself today. I missed a number on the EOT and it made my ECT EOT temps around 35 degrees apart! Thankfully I figured out my screw up. Good scare however.
Super Moderator
Joined: May 2004
Posts: 29,380
Likes: 118
From: Central Coast of CA
That was a stomach-drop-out-of-your-belly moment!
Stewart
Thread Starter
|
Senior User
Joined: Nov 2003
Posts: 332
Likes: 0
From: NH
It certainly was! 
I answered my own question. I drilled a small hole in the corner and pulled the cable up through it. Looks great and you cannot see any cable.
I answered my own question. I drilled a small hole in the corner and pulled the cable up through it. Looks great and you cannot see any cable.
Posting Guru
Joined: Oct 2011
Posts: 1,076
Likes: 1
From: Las Vegas, Nevada
Thread
Thread Starter
Forum
Replies
Last Post
abe
1948 - 1956 F1, F100 & Larger F-Series Trucks
13
Nov 30, 2017 11:18 PM
bigblockford_390
6.4L Power Stroke Diesel
8
Feb 12, 2015 12:26 AM
F-250 Super Duty
1999 - 2003 7.3L Power Stroke Diesel
10
Jun 11, 2013 07:24 AM
