bedwood problems and solutions

Reply Subscribe

Thread Tools

Search this Thread

Jul 8, 2013 | 08:18 AM

jniolon

Thread Starter

old and in the way

Joined: Jul 1997

Posts: 5,918

Likes: 1,051

From: Lovely Hueytown Alabama

bedwood problems and solutions

did a write up on my rear cross member / bed wood problem and the solution...

just putting it out there for reference if anyone else runs across this too...

and thanks to all for their input and advise..

later
John

Bed wood problems and solutions

Jul 8, 2013 | 06:16 PM

bobbytnm

Roast em' if you got 'em

Joined: Mar 2005

Posts: 21,984

Likes: 9,837

From: Rio Rancho, NM

Nice John,

You always do a great job on gettind details down clear and concise with good pics for illustration.

A big round of frosty beverages in your honor!!
Bobby

Jul 9, 2013 | 06:58 AM

topmoo

Postmaster

Joined: Aug 2003

Posts: 3,222

Likes: 6

From: Houston

Excellent information, thanks for putting this together.

Jul 9, 2013 | 07:56 AM

sdetweil

Hotshot

Joined: Nov 2000

Posts: 11,591

Likes: 14

From: Pflugerville, tx

Nice Article John!...

Jul 9, 2013 | 09:36 AM

Elder User

Joined: Feb 2013

Posts: 518

Likes: 0

From: Crystal Lake

Like.........

Jul 15, 2013 | 02:16 PM

rzns60

Senior User

Joined: Dec 2009

Posts: 189

Likes: 0

From: Austin Texas

Great write up and very helpful. Thanks for taking the time John.

Jul 28, 2013 | 12:49 PM

Jasonnoel

Senior User

Joined: Apr 2012

Posts: 171

Likes: 1

From: Gilbert, AZ

Quote:

Originally Posted by jniolon

Bed wood problems and solutions

Great write up. Although I'm not sure why you had such problems. I've installed over 10 beds, and although each has its set of problems, I've never seen it that far off. I usually have to give about 3/32 gap at the front panel then most everything else is workable. I'm not sure why China can't be more accurate either. It's simple stuff.