Need Help
Thread Starter
|
New User
Joined: Jul 2002
Posts: 21
Likes: 0
From: Ocala
Need Help
Ok Here we go. I have a 1974 302 just had it bored 40 over. I did not have the heads for it but i had a set of 351w heads. I asked the guy at the machine shop and he said everything that i order should be order for a 302(push rods, rocker arms, plates). I know i need different head bolts and have already order them and are installed. Yesterday I called summit to order pusrods and rocker arms and plates, and the guy told me that if i want to use the head i must get the stud mount machined also so that they are the right hieght. I dont know what to do. I have already spent the money on these head and want to use them but do not want to take them make to the machine shop. any info will help greatly. I hope i can just use 302 parts.
Thread
Thread Starter
Forum
Replies
Last Post
z1121jack
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
18
Apr 5, 2008 03:04 PM
TOUGHY17
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
6
Nov 6, 2001 10:27 PM
