Sound control/thermal control/extra storage
Thread Starter
|
Lead Driver
Joined: Nov 2012
Posts: 8,304
Likes: 28
From: Salem, VA
Sound control/thermal control/extra storage
So I started working on my bard doors last week and wanted to post up my progress and get some suggestions/comments from you guys 
To start out I removed the door panels (they didn't stay on well anyway) and trimmed the inner panel so I could start on my extra storage panels. I used some sound deadener (sp?) on both doors but read the last day or 2 that total coverage and secondary layers is overkill so I won't be doing that in the future. I then used expanding foam in the doors to fill all the space except for where the interior workings are. There is styrofoam in some of the pics, but that was just to control it and was removed once it dried. I still have to make the storage, cut down the excess foam and then get on with the second half of the project, but this is what I have so far
To start out I removed the door panels (they didn't stay on well anyway) and trimmed the inner panel so I could start on my extra storage panels. I used some sound deadener (sp?) on both doors but read the last day or 2 that total coverage and secondary layers is overkill so I won't be doing that in the future. I then used expanding foam in the doors to fill all the space except for where the interior workings are. There is styrofoam in some of the pics, but that was just to control it and was removed once it dried. I still have to make the storage, cut down the excess foam and then get on with the second half of the project, but this is what I have so far
Any thoughts so far?
Thread
Thread Starter
Forum
Replies
Last Post
lossscause
1999 - 2003 7.3L Power Stroke Diesel
80
Apr 10, 2016 11:16 PM
siloketh
1957 - 1960 F100 & Larger F-Series Trucks
8
Aug 16, 2014 06:19 PM
willbd
Bio-diesel, Propane & Alternative Diesel Engine Fuels
1
May 15, 2007 06:11 PM
