Emission Compliant Headers
Thread Starter
|
New User
Joined: Apr 2013
Posts: 1
Likes: 0
Emission Compliant Headers
I did alot of searching on this forum and have not quite found what I'm looking for. I have a 95 F350 SRW 4x4 with 5.8 Liter 5 Speed with 4.10s and LSDs in each axle. Each exhaust manifold has tubes that enter the firewall side of the manifold. The converter does not have air tubes. I have a new Flowmaster cat back system. I had to drill out 3/4 of the converter studs (someone did one already). Someone crushed the passenger side headpipe by the starter, so I will be replacing the headpipe assembly. I have been doing research on headers first. I would like long tube headers that would accept the EGR tubes, I may consider short tube headers. I would make up my own "y pipe". I want to retain all stock emissions hardware. What are my choices. I have checked both Summit and Jegs don't see headers set up with tubes on both sides. If I can't get what I'm looking for I stick with the stock manifolds. Thanks for any help
Thread
Thread Starter
Forum
Replies
Last Post
steve_speak
1987 - 1996 F150 & Larger F-Series Trucks
4
Aug 24, 2007 08:09 AM
