Radius Arm Bushings
Thread Starter
|
Junior User
Joined: Jun 2011
Posts: 72
Likes: 0
Radius Arm Bushings
Hey guys, i have a 1993 ford f150 4x4 with a 4.9. Im in the process of trying to replace the radius arm bushings as i get a slight clunk when i take off and stop. Can anybody tell me what size the nut is that holds the radius arm/bushing to the bracket?
Elder User
Joined: Oct 2006
Posts: 705
Likes: 2
From: stinkin lincoln, maine
Can't remember the nut size, but I pulled my axle forward enough with a come-along to to get the radius arm out of the bracket, then replaced the bushings.
Quicker and easier than removing the brackets IMO.
Quicker and easier than removing the brackets IMO.
Senior User
Joined: Jul 2011
Posts: 164
Likes: 1
From: The Lost Coast
Definitely easier removing the radius arm. angle grinder and an air hammer made it easy. i bought new brackets so i didn't have to be fine with my angle grinder work.
Thread
Thread Starter
Forum
Replies
Last Post
LITTLE BLACK TRUCK
1973 - 1979 F-100 & Larger F-Series Trucks
27
Aug 13, 2015 02:30 PM
