When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So i did a bunch of research on the typical fuel pump noise coming through my CB radio. Yes I verified it's being picked up by the antenna.
The fix I read most effective was soldering a .01uf Capacitor accross the + and - leads of the fuel pump. My mechanic did this after changing to new fuel pumps and the voltage to the pumps dropped on the power wire from 12V to 2V and wouldn't run the pump!
He said they were good...and reverified. Well the noise is still there after two new pumps, grounding the bed twice, and 4 ferrite chokes on the power wires.