TPS screws
Thread Starter
|
Posting Guru
Joined: Apr 2011
Posts: 1,119
Likes: 1
From: Hartland, WI
TPS screws
Anyone happen to know the size and thread pitch of the screws used to hold the TPS on? After 15 years mine were stuck in and snapped, one came out with a vice-grips, the other will need to be drilled and extracted. Also, has anyone replaced them with allen-head screws or anything more robust? Anti-seize will be used when it goes back together.
Thread Starter
|
Posting Guru
Joined: Apr 2011
Posts: 1,119
Likes: 1
From: Hartland, WI
Got the screw out, my cousin TIG welded a nut to what was left of it. For those wondering, the thread size is M4x0.7. Also a bit of knowledge I picked up, the bolts holding the TB to the intake are standard (3/8" IIRC), NOT metric.
Thread
Thread Starter
Forum
Replies
Last Post
redspanhead
1967 - 1972 F-100 & Larger F-Series Trucks
20
Dec 18, 2016 08:55 AM
alchemist1
1973 - 1979 F-100 & Larger F-Series Trucks
9
May 4, 2013 08:19 PM
