timming issue and a bang
Thread Starter
|
New User
Joined: Oct 2011
Posts: 23
Likes: 0
timming issue and a bang
So i have a 69 f100 with the original 69 302 but with 87 f150 heads (e7te i think), afb 600 cfm carb, headers, unknown cam, edlebrock intake.
i just torqued all the rockers to 23 lbs and set my distibuters rotor to number 1 on the cap and tdc compression stroke, the truck would start but not stay running. i turned it up to 12 btc and it runs witha rough idle when i turned it up more around 16-20 btc or even a little more it doesnt idle rough and it has better throttle response BUT now if i rev the engine to about 2500-3000 and let right off i hear a single knock from the drivers side.
i cant find out whats going on i keep going over it again and again
what could be the issue???
i just torqued all the rockers to 23 lbs and set my distibuters rotor to number 1 on the cap and tdc compression stroke, the truck would start but not stay running. i turned it up to 12 btc and it runs witha rough idle when i turned it up more around 16-20 btc or even a little more it doesnt idle rough and it has better throttle response BUT now if i rev the engine to about 2500-3000 and let right off i hear a single knock from the drivers side.
i cant find out whats going on i keep going over it again and again
what could be the issue???
Thread
Thread Starter
Forum
Replies
Last Post
82lightspruce
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
9
Dec 8, 2017 10:20 AM
rwjr
Fuel Injection, Carburetion & Fuel System
6
Apr 2, 2016 04:09 PM
jwcopeland
1973 - 1979 F-100 & Larger F-Series Trucks
9
May 24, 2015 07:56 PM
packrat56
1948 - 1956 F1, F100 & Larger F-Series Trucks
17
Jan 31, 2006 11:12 AM
