HELP ! LQQking for a Saginaw pump & Bracket.
#16
You need to host them on a file sharing site like Photobucket or Flickr.
Could your internet connection handle 100k+ hit's all trying to see one picture on your PC?
There's a FAQ down at the bottom of the forum regarding this question specifically.
https://www.ford-trucks.com/forums/forum77/
Could your internet connection handle 100k+ hit's all trying to see one picture on your PC?
There's a FAQ down at the bottom of the forum regarding this question specifically.
https://www.ford-trucks.com/forums/forum77/
#17
C:\Users\RICHARD\AppData\Roaming\Microsoft\Windows \Recenthttp://"C:\Spyware Tools\OEM Saginaw pump from Dealership.jpg"Above is the Pic of Saginaw pump from Dealer I may purchase.
Pic's of my latest build. C:\Users\RICHARD\Pictures\2010-08-17 mix new bike holly\mix new bike holly 109.JPG
C:\Users\RICHARD\Pictures\2010-08-17 mix new bike holly\mix new bike holly 104.JPG
Pic's of my latest build. C:\Users\RICHARD\Pictures\2010-08-17 mix new bike holly\mix new bike holly 109.JPG
C:\Users\RICHARD\Pictures\2010-08-17 mix new bike holly\mix new bike holly 104.JPG
#20
I'm interested to see how you work this out.
I have a double V-belt driven C2 PS pump that just drives me mad.
The Cardone & NAPA Saginaw swap units are long gone.
I may try and adapt one of the JBG Windsor swap kits with the GM pump to bolt up to my 460.
At least then I would have a pulley that fits the common shaft and be able to find a replacement anywhere, if I need one.
I have a double V-belt driven C2 PS pump that just drives me mad.
The Cardone & NAPA Saginaw swap units are long gone.
I may try and adapt one of the JBG Windsor swap kits with the GM pump to bolt up to my 460.
At least then I would have a pulley that fits the common shaft and be able to find a replacement anywhere, if I need one.
#21
The Saginaw pump I located Is from MIKE RAISOR FORD in Lafayette IN
This is one of the 5 sources I listed in post 12 that I found NOS E2UZ-3A674-A pumps at.
I was talking to the Parts guy named "Jim". Nice guy. The Pump Part # Is the same as you've posted Bill. # E2UZ-3A674-A I think he said It costs $167.
Ya know, that Custom bracket manufacturer that Puddy gave me has been In contact w/me via email (They dont make phone contact at ALL ! All done through Emails ! CRAZY WORLD WE LIVE IN NOWADAYS !)
If I had time...but between my Day job and my new Custom Harley parts Business that I am trying to get off the ground w/another gentleman, I have absolutely NO free time right now, hence why I am so far in the woods w/all of this, to date.
Please see pic's of my last bike I built Bill.
This is one of the 5 sources I listed in post 12 that I found NOS E2UZ-3A674-A pumps at.
I was talking to the Parts guy named "Jim". Nice guy. The Pump Part # Is the same as you've posted Bill. # E2UZ-3A674-A I think he said It costs $167.
Ya know, that Custom bracket manufacturer that Puddy gave me has been In contact w/me via email (They dont make phone contact at ALL ! All done through Emails ! CRAZY WORLD WE LIVE IN NOWADAYS !)
If I had time...but between my Day job and my new Custom Harley parts Business that I am trying to get off the ground w/another gentleman, I have absolutely NO free time right now, hence why I am so far in the woods w/all of this, to date.
Please see pic's of my last bike I built Bill.
I don't know diddly-do about motorcycles, have never owned, ridden or even sat on one. I've been a Ford & Packard, Winchester & Colt collector/historian for over 50 years.
I'm also a US Navy and Maritime historian, volunteer on the battleship USS IOWA (BB-61), now berthed in LA harbor (San Pedro) as a museum ship.
Thread
Thread Starter
Forum
Replies
Last Post
TexasGuy001
1987 - 1996 F150 & Larger F-Series Trucks
36
08-29-2022 10:24 AM
efernald
1987 - 1996 F150 & Larger F-Series Trucks
2
06-11-2003 10:51 PM